Tips From the Moving Company Pros: Ways To Move a Pinball Maker



With pinball making a huge revival across the country, Mild Giant desires to make sure that these traditional, lovely machines remain damage-free while being carried. Oh, and we want the people moving them to be safe, too.

At very first glance, pinball machines can appear daunting to move due to the fact that of their weight, size, and fragility. Luckily, our skilled Giants have a few techniques up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox

The majority of contemporary pinballs (made in the last Twenty Years approximately) have a hinge system which allows the headbox to be folded down. Early pinball devices had their headboxes bolted on, utilizing either 2 or four bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State makers.

Later devices have hinges and utilize a locking system to keep the headbox upright. There may also be two bolts inside as included security, in case the latch is broken or unintentionally un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball devices, you have to remove the headbox rear access panel to get to the bolts and plugs within. Generally this panel has a lock on it to keep it in place, but in time the secret might have been lost. Frequently, there is a screw keeping this panel in place.

When within, get rid of the bolts and unplug the large ports that have circuitry decreasing into the machine. You may want to identify these adapters to put them back in the right spot, but they must be various sizes, making it difficult to plug back incorrectly.

You can now eliminate the headbox totally, or fold the headbox down onto the playfield glass. Make certain you utilize some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in place.
Early Strong State Pinballs

For early Strong State Pinballs, you will require to remove the back glass. There is a lock located on the headbox in one of three places: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the center.

When opened, get rid of the back glass by raising it up using the lift channel (at the bottom of the glass), and after that pull it out from the bottom.

Then, open the back box light panel by raising the latch located on either the left-hand side or right-hand side. The panel can now swing out towards you, and give you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to raise the light panel in order to swing it open.

Now that you are within, you can get rid of the bolts, and any plugs that have wires decreasing into the machine. You may wish to label these plugs to put them back in the best area. You might not require to get rid of the plugs, as the circuitry should be long enough to allow the headbox to be folded down.

At this point, you can lock up the lamp panel and change the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Using the supplied key, turn the latch 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the maker. This is a basic setup and needs no tools.

If you can now fold down the head box onto the cabinet, you're done. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.

If you can not fold the head box down, then you require navigate here to get within. There is a lock situated at the top of the back glass in the. Use the supplied key to unlock, and eliminate the back glass by raising it up from the bottom, and after that pulling it out from the bottom.

Next, you will have to get rid of the display screen panel. You can do this by raising it up and out. Open the light panel. There will be a lock situated on either the left-hand or right-hand side. (Some more recent Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

Remove the two bolts, put the back box back together, and fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Removing the Legs.

Pinball Machine legs are held in place by eight bolts. They will be either 5/8 inch or 9/16 inch heads. The modern pinballs have captive nuts or threaded plates inside for this page the bolts to screw into. These bolts can be removed, and the legs will come off.

These threaded plates and captive nuts can be harmed, and the usage of additional nuts might have been needed. If this holds true, you will require to open the front door of the pinball, slide out the playfield glass, and raise the playfield.

With the front door (coin door) open, move the lock down bar latch across and eliminate the lock down bar. Slide out the playfield glass, and put in a safe place. Next, lift up the playfield by placing your hand where the ball drains, and raise the playfield up.

You need to now have access to any nuts that might have been utilized. As soon as any nuts have actually been eliminated, change the playfield glass and lock down bar, and lock the front door.

Make sure to mark or remember which legs are for the front and back, as they will be adjusted differently to suit.
Loading the Pinball.

You are now ready to transport your pinball maker. Prior to you fill it, make certain you eliminate the pinballs so they do not bounce around during transport.

If you are moving the pinball utilizing a van or SUV, it might be simpler to eliminate the legs just prior to loading the machine. Get a pal to assist and have one of you supporting the pinball, while the other removes the front legs.

Make sure you strap the pinball in, as you do not desire it moving if you need to stop unexpectedly!

For Electro-Mechanical pinball devices, you need to remove the headbox rear access panel to get access to the bolts and plugs inside. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

If you are moving the pinball utilizing a van or SUV, it may be easier to remove the legs simply prior to filling the device. Grab a buddy to have and assist one of you supporting the pinball, while the other gets rid of the front legs.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Tips From the Moving Company Pros: Ways To Move a Pinball Maker”

Leave a Reply

Gravatar